2019 is over and 2020 is here! OnScale saw a lot of new features added in 2019. Let’s take a look at five of our favorites.

We’ve created some simulation guides to help you quickly start simulating in OnScale. You’ll find examples for key applications including MEMs, NDT, RF Sensors, Flow and Biomedical. You can check them all out here!

In this article, we will discuss the issues the MEMS industry faces with packaging and how OnScale can be used to simulate a wide range of packaging effects.

Let’s talk about Monte Carlo Simulation (MCS) and how it can be used to optimize transducer design.

In this article, we will discuss scripting in OnScale and show you how to build the most basic model in OnScale using only 11 lines of code.

In this article, we will discuss Genetic Algorithm and how it can be used for Film Bulk Acoustic Resonator (FBAR) design optimization.

In this article, we will discuss the different Key Performance Indicators for devices and how these can be extracted in OnScale using Review.

In this article we discuss how to pole piezoelectric materials in OnScale and walk through an example of how to rotate the material properties of Lithium Tantalate for the Y-cut angle in an LT-SAW.

In this article we discuss Genetic Algorithm (GA) optimization for a Solid Mounted Resonator (SMR) design using OnScale Command Line Interface (CLI) and MATLAB Optimization Toolbox.

In this article, we discuss how to perform a Monte Carlo Simulation (MCS) on a PMUT ultrasonic sensor in OnScale to obtain a full picture of the design space.